Document Trim Size (final size after being cut)
Horizontal Vertical
3.37“ x 2.13" 2.13" x 3.37
85.5mm x 54mm 54mm x 85.5mm
1010 x 638pixels 638 x 1010pixels
Full Bleed Size (starting document size)
Horizontal Vertical
3.44" x 2.20" 2.20" x 3.44"
88.5mm x 57mm 57mm x 88.5mm
1045 x 673pixels 673 x 1045pixels
* Finished artwork should use the full bleed dimensions for best results.
* Please be sure to keep all text within the safe margin.
We support a variety of file formats for uploading designs.
Vector Graphic Files is preferrd- vector-based images can be scaled by any amount without degrading quality. Usually supplied in PDF, AI, EPS or CDR formats.
Before submitting your artwork, please check that:
1. The preferred format is vector graphic files. Usually suppies in PDF, AI,EPS OR CDR formats.
2. Your artwork is the correct size. Artwork to be 1-up on a single page document.
3. Bleed is set to exact 1.5mm
4. The document colour mode set to CMYK
5. All Rich Black are set to C = 40%, M = 0%, Y = 0%, K = 100%.
6. All fonts are outlined (converted to curves) or embedded.
7. All links are embedded.
8. All lines in your artwork are at least 0.3pt and all text should be at least 8pt using a non narrow style font.
9. All borders in your artwork are at least 5mm wide.
10. All images in your artwork are 300dpi when placed at 100%.
Please Note:
1. If two sides are selected, your artwork should contain a design for both sides.
2. Also if possible, please provide crop marks around the artwork.
3. Colours may appear darker when Matt Lamination is applied.
4. We print in CMYK and not RGB. Supplying artwork in RGB will effect the final colour.
5. If business cards are ordered with any additonal option, a PDF proof will always be sent to the customer. This must be approved before the job can be printed. If not approved in time, the order may be delayed.
Hologram areas could show different shining colours when looking from different angels. It highlights the important parts in your business cards or postcards such as a company logo or your name.
Yes, it is shinning and eye-catching!
Hologram is the process of stamping a shiny, thin hologram metal die onto printed card stock.
Holgoraphic Foil on the printed piece by accentuating important content such as a logo or a company slogan.
Specifications:
Estimated production time: 2-3 business days (*should be added to printing production time.)
Maximum size: 20mmX20mm
Applicable side: Foiling can only be done on one side of the card,
double sided hologram available at extra cost.
* 1.Larger than size of 20mm x 20 mm or multiple areas must be custom quoted at: info@boostprint.com.au
2. Oversize foiling may require additional days for the production and foiling areas should be larger than what can be compared to a point 7 font so that details are not lost.
3.We suggest you request samples to see if the hologram we made can meet your need.
The hologram is done after the printing process and there is unavoidable offsetting during the foil process. That means the foil can not sit on the position exactly as it designed, usually a shift deviation upto 1mm is reasonable. Please take that in consideration for the artwork and avoid similar result as below. And 7daysprint will not be liable for the reasonable offsetting.
File Preparations: Holograms
For the file preparation of the holographic area on the business cards, you need to submit extra documents as below (file 01,file02 , file03). JPG file is not acceptable, Vector Graphic Files is preferrd- vector-based images can be scaled by any amount without degrading quality. Usually supplied in PDF, AI, EPS or CDR formats. Colours set to CMYK, All images in your artwork are 300dpi when placed at 100%, All fonts are outlined (converted to curves) or embedded.
* Or you can supply us just a file (AI, PDF, PSD, CDR format is prefered) setting all the files below on separate graphic layers
File Name: Front or Front & Back
EXAMPLE CASE: Holograms the puzzle logo
1. This document should be the complete design of the front or back of your card that has Holograms area.
2. File Name: Printing
This document should be only the areas printed with ink (this should not include the Holograms area)
3. File Name: Holograms
This document should include only the areas for Holograms, denoted in 100% black.
1. What is Hologram?
Hologram is the process of stamping a shiny, thin hologram metal die onto printed card stock.
Holgoraphic Foil on the printed piece by accentuating important content such as a logo or a company slogan.
3. Can the Hologram be done on any area of your business cards?
The Hologram is done after the printing process and there is unavoidable offsetting during the hologram process. That means the hologram can not sit on the position exactly as it designed, usually a offsetting upto 1mm is reasonable.
So we don't recommend to do the foil too close to the pritning area(image or text). Just a little shift could cause a mistake that the foil could overlap the printing (green colour) and ruin your design. at least 2mm space between the foil area and priting area is required.
4. How to indicate the opaque area on a frosted card?
If you want a colour to be opaqueness, we will add the white blocker under the colour to make it opaqueness. Adding white blocker is an opaque layer behind the printing to make it pop off the cards and add opaqueness.
5. How to indicate the area to be seen through without printing?
For the frosted/clear plastic cards, all white area in your artworks would be seen through without printing. So just make the area you want to be frosted/clear without colour printing in white in your artworks. Then we will leave it blank on the final cards
6. Can I get the Clear Frosted Business Cards double sided?
Yes, but double sided printing is available only for specific artwork, please email us the artwork at contact@boostprint.com.au then we would check any possible problem. The cost would be also different.
7. Can Clear Frosted Business Cards be written on?
Unfortunately not, even a permanent marker cannot be used to write on such card stock.
8. Can I put a photo on such card stock?
Yes, but please note the photo may look some different on such card stock.
9. Can the corners be done a right- angle?
Unfortunately, the standard corners of all our plastic cards including the frosted business cards are rounded corners.
10. Do you give a quality guarantee on your work?
7daysprint stands behind the quality of its products and services. If you are not satisfied with your purchase from us, simply contact Customer Service by email within 15 days from the date you receive it (or the date it was scheduled to arrive), and we will reprint part or all of your order. In some cases, we may refund the full price of the product(s) in question, excluding shipping, postage. 7daysprint is committed to customer satisfaction, and we do everything possible to ensure proper cutting, accurate color reproduction, and excellent printing quality. However, certain circumstances are beyond our control and are not covered by this guarantee. Please check the Term and Conditions page to note that we cannot be responsible for.
11. Can we split our order for 500 into 2 names of 250 cards?
Yes, we can split up into 250 cards for one design, 250 for another name. But Extra Split fee will be charged for the spliting order. You can contact us with Email us at info@boostprint.com.au and enquire direct with our bespoke printing expert. We will give you a quote there.
12. How do I know if my Order has been Dispatched yet?
It is very easy to find your order. To view the details and status of your order, you may log in anytime after placing your order. Listed below are four different status codes for our workflow.
-In prepress. We check file availability. If you did not meet artwork requirement, we ask you to revise file and send us by email.
--Ready to print. If your artwork is fine to print, our prepress department is preparing your job for print.
--Finish printing.
--Shipped.
When your order is dispatched, it will show as ‘shipped’ which is just after the dispatch process. The serial number of any post bag or con note is displayed in the details section. And you can require us to send the tracking number via email.
13. Can you print the colour as same as that in my design?
At Boostprint we take pride in matching colours to our clients CMYK proofs. however the following terms and conditions apply.
1. Print colour may vary from print run to print run and/or from job to job or from front to back.
2. Boostprint will reproduce colour from digital files as closely as
possible, but may not exactly match colour and density due to limitations in the proofing and printing process, as well as neighbouring image ink requirements.
3. A reasonable variation in colour between original materials, proofs and the completed order, will be considered acceptable print quality.
4. It is important to note the technical limitations of screen, digital and offset printing processes.
5. Where CMYK designs are used, a higher degree of colour variation is normal. While every effort is made to reproduce the colours on chemical and professional digital proofs Boostprint Pty Ltd shall not be liable to reprint or otherwise compensate the client for a commercially acceptable variation in colour when comparing the proof to the final product, the disc to paper parts, or throughout a printed batch of products.
6. Acceptable variations may be up to 10% of selected CMYK colour values, Colour Matching and Proofing Process.
At 7daysprint you should only expect high quality business cards that are cost-effective. Still looking for answers?
Please read our Frequently Asked Questions page for more commonly asked questions.